Archivo de la etiqueta: Micronor

MR390 High sensitive fiber optical 3-axis sensor for seismological use

MR390 High sensitive fiber optical 3-axis sensor for seismological use:

Sensor, Cable, Conditionar. For foundations, bridge, ground…

  • Frequency Response 0.5Hz…80Hz
  • Nominal sensitivity 400mV/g (0.0001 g/micro-m/m)
  • Maximun acceleration 1g
  • Temperature range -40ºC…+80ºC
  • IP68 EN60529
  • Humidity 1000 hous 95% RH 40ºC
  • Cable lenght up to 1000m
  • 19º Rack modules
  • CE Conformity EN61000-6-1, 61000-6-3 and -6-4
  • MTBF > 100’000 hours

MR 660 – 3D Acceleration Sensor

MR 660 Handy Fiber optical 3 Axis Accelerations Sensor case.

  • Frequency response 0,5…330Hz or 1…1000Hz
  • Measuring range 50g
  • Protection class IP68
  • max. shock 2000g
  • Output signal 100mV/g pk-pk
  • Immune against lighting, hogh voltage etc.
  • Sensor housing 18x18x35mm
  • Power 12V DC, Power supply 230V AC
  • Temperature range -25…100ºC
  • MTBF > 200’000 hours
  • Sensor housing Polycarbonat or Ceramic

For End Winding, Generators, High Voltage and EMV Laboratories, Foundation movements, Ball Bearing monitoring…

MR 660 - 3D Acceleration Sensor
MR 660 – 3D Acceleration Sensor

ENAM 58: Floor position system for the elevator

ENAM 58: Floor position system for the elevator

  • Absolut multiturn Encoder with 24 or 25 Bit or CanBus
  • Robust shaft bearings with 800N radial and 300N axial load
  • SSI interface or CAN
  • Special print of ESD and reverse polarity protection
  • Standard WAGO connector
  • Preset value solution for fast installation
  • Price optimal solution
  • 5cm cable or according to customer requirements
  • IP65 according to EN 60529
  • CE compliant EN61000-6-2, EN 61000-6-4 and EN 61000-6-6
  • RoHS compliant, EG directives 2002/95/EG
  • Working temperature -30ºC…+85ºC
  • MTBF > 100’000 hours
  • Supply voltage 10…30VDC
  • Current consumption 50mA

HQSX0tA0

These product is useful for the elevator industry from the goods lifts to the high end people transport…

100% Fiber optical Cantenary Lift Measuring point

MR588

  • Lift information analog or digital
  • 4-20mA, 0-10V DC or TTL RS422
  • Measuring range +/- 300mm
  • Accuracy +/- 0.2mm
  • Reset function
  • Working temperature -40ºC to 80ºC
  • Glass fiber 62,5/125 standard MM Fiber Data export via Ethernet / IP
  • max. wire speed 3m/s
  • Protection class IP67 EN 60529
  • Signal transmission max. 3000m
  • Very robust measuring system
  • All Weather suitable
  • Simple installation using standard
  • Railway infrastructure material

FRL90, Hollow shaft geared cam limit switches with position potentiometer

For Lifting Equipment, presses, mobile masts, military and municipal vehicles…

  • IP68 EN 60529
  • Angle output 0…5kOhm
  • Temp. -45ºC…85ºC
  • without coupling
  • easy mounting
  • 3 rotary limit switches
  • used revolution 1:1 up to 1000:1
  • MIL-S-8805 microswitches
  • MIL-VG-96912A flange socket
  • Cam type free selectable
  • 100% anodized alu. housing
  • Hollow shaft stainless stell
  • CE-RoHS-compliant
  • Shock MIL-STD-810G
  • Meth 503.5

MR 350 Fiber Optical Microphone

MR 350 Fiber Optical Microphone, for Oilplatform, Gas, Chemicals, Mines…

  • High SNR Omni-directional Microphone
  • Frequency Response 20Hz…10’000Hz
  • Sensitivity 15mV/pa +- 10% at 1kHz
  • High Pass Filter Mode for 22 dB noise reduction
  • Headphone Output “PHONE” and “LINE-REC”
  • Wind noise reduction, Water repellend
  • ATEX G II Cat 2 GD
  • Fiber type 62,5/125/250
  • Cable: Oil, must, Fire resistance and Halogen free
  • Standards: IEC 60331. 60332, 60754, 61034
  • Temperaturerange: -40ºC…+80ºC
  • Protection IP67 EN 60529
  • Humidity 1000 hours up 95% RH at 40ºC
  • Cable lenght up 500m
  • 19º Rack module
  • CE Conformity EN61000-6-1, 61000-6-3 and -6-4
  • MTBF > 100’000 hours