Minientradas

MR390 High sensitive fiber optical 3-axis sensor for seismological use

MR390 High sensitive fiber optical 3-axis sensor for seismological use:

Sensor, Cable, Conditionar. For foundations, bridge, ground…

  • Frequency Response 0.5Hz…80Hz
  • Nominal sensitivity 400mV/g (0.0001 g/micro-m/m)
  • Maximun acceleration 1g
  • Temperature range -40ºC…+80ºC
  • IP68 EN60529
  • Humidity 1000 hous 95% RH 40ºC
  • Cable lenght up to 1000m
  • 19º Rack modules
  • CE Conformity EN61000-6-1, 61000-6-3 and -6-4
  • MTBF > 100’000 hours

Energy distribution: Transformers- Charging Monitoring

Energy distribution: Transformers- Charging Monitoring

E3IF500mAAC Tele Haase
E3IF500mAAC Tele Haase

Task:
A charging unit for forklifts is to be protected against overheating. The charging current is high at the beginning of the charging process, and the charger is to be cooled with a fan.

Solution:
On the primary side, the current consumption of the charger is monitored. If the set threshold is exceeded, the output relay is tripped and switches the fan on. When the charging current falls (maintenance charge), the fan is switched off.

 Use/value:

  • Simple implementation
  • Protects the charger

Our products: E3IF500mAAC

Please see more on our homepage:
http://www.tele-online.com/en/case-studies/charging-monitoring/

ENAM 58: Floor position system for the elevator

ENAM 58: Floor position system for the elevator

  • Absolut multiturn Encoder with 24 or 25 Bit or CanBus
  • Robust shaft bearings with 800N radial and 300N axial load
  • SSI interface or CAN
  • Special print of ESD and reverse polarity protection
  • Standard WAGO connector
  • Preset value solution for fast installation
  • Price optimal solution
  • 5cm cable or according to customer requirements
  • IP65 according to EN 60529
  • CE compliant EN61000-6-2, EN 61000-6-4 and EN 61000-6-6
  • RoHS compliant, EG directives 2002/95/EG
  • Working temperature -30ºC…+85ºC
  • MTBF > 100’000 hours
  • Supply voltage 10…30VDC
  • Current consumption 50mA

HQSX0tA0

These product is useful for the elevator industry from the goods lifts to the high end people transport…

FRL90, Hollow shaft geared cam limit switches with position potentiometer

For Lifting Equipment, presses, mobile masts, military and municipal vehicles…

  • IP68 EN 60529
  • Angle output 0…5kOhm
  • Temp. -45ºC…85ºC
  • without coupling
  • easy mounting
  • 3 rotary limit switches
  • used revolution 1:1 up to 1000:1
  • MIL-S-8805 microswitches
  • MIL-VG-96912A flange socket
  • Cam type free selectable
  • 100% anodized alu. housing
  • Hollow shaft stainless stell
  • CE-RoHS-compliant
  • Shock MIL-STD-810G
  • Meth 503.5

MR 350 Fiber Optical Microphone

MR 350 Fiber Optical Microphone, for Oilplatform, Gas, Chemicals, Mines…

  • High SNR Omni-directional Microphone
  • Frequency Response 20Hz…10’000Hz
  • Sensitivity 15mV/pa +- 10% at 1kHz
  • High Pass Filter Mode for 22 dB noise reduction
  • Headphone Output “PHONE” and “LINE-REC”
  • Wind noise reduction, Water repellend
  • ATEX G II Cat 2 GD
  • Fiber type 62,5/125/250
  • Cable: Oil, must, Fire resistance and Halogen free
  • Standards: IEC 60331. 60332, 60754, 61034
  • Temperaturerange: -40ºC…+80ºC
  • Protection IP67 EN 60529
  • Humidity 1000 hours up 95% RH at 40ºC
  • Cable lenght up 500m
  • 19º Rack module
  • CE Conformity EN61000-6-1, 61000-6-3 and -6-4
  • MTBF > 100’000 hours